Salestech Chipper Knives are suitable for a range of industries, including saw milling, pulp & paper, plywood and veneer industries for processing both hard and soft woods. Our knives are manufactured with skilled personnel utilising the very best raw materials and produced under the tightest controls on the very best equipment. Our knives are carefully heat treated, mostly in the range of 54-58 ROC.

AKE Salestech supply knives to fit both USA and European manufacture chippers as well as the ability to produce any special chipper knife to your drawings. With a wide range, available ex-stock our Melbourne warehouse.

In a world where the measure of a good knife is price v performance, always rely on Salestech for the best fit to suit your exacting requirements.

Counter Knives

The counter knife performs a critical, but often overlooked, role in the chipping process. The counter knife is critical in reducing the size of the chip.

Salestech supply three types of counter knives:

• Standard solid tool steel thru-hardened
• Wearproofed High Speed Steel inlaid
• MAX Tungsten Carbide inlaid

A wearproof counter knife will last up to four times longer than a standard knife with The MAX counter knife being widely used in whole-log chippers. The MAX knife will not last forever, but you could forget how to change it before it wears out.

Peeler / Slicer Knives

We supply several types of Peeler and Slicer Knives in both Solid Steel and Composite materials for both hardwood and softwood applications.

Our knives are engineered for highest yield and highest quality output, ensure the highest yield. To complete the offering, we are also able to supply Nose and Shear Bars in various grades of material depending on the requirements.

Chipper Anvils

We supply both vertical (side anvils) and horizontal (bottom anvils) in solid alloy and carbide tipped to fit a broad range of chippers both Disc and Drum types.

Edge-per-edge a carbide tipped anvil will last 4-6 times longer than a hard-faced anvil with the added advantage of improved chip quality. In a wear application, such as this a tough carbide is essential to achieve the best results. The unique brazing technique ensures the carbide stays put even with heavy debris knocks.

Holders & Clamps

Salestech supply a variety ofOEM holders and clamps to fit Precision, Fulghum, Morbark and Nicholson. We can also supply pocket hardware manufactured to sample or sketch. All holders and clamps are produced with high grade steel on the very latest equipment by people who make holders and clamps for a living.

Chipper Accessories

Salestech supply a full range of chipper parts to fit both USA and European manufactured chippers, such parts include fan blade, anvil clamp, disc wear plates, feed plate, studs, feed rollers, nuts and washers.

Salestech stock the most comprehensive range of chipper knives and parts for the most common machines found in the market.

Brands such as:

• Precision
• Morbark
• Fulghum
• Isle Forge
• Bruks
• Carthage
• Nicholson
• Kockums
• CAE
• Soderham
• Acrowood
• Andritz
• Ari
• Erjo
• Klockner
• Peterson

Chipper Canter, Profiler and Slabber Knives

Tight tolerance, high precision tools are essential in all applications. Manufactured under close skilled supervision Salestech can supply some dimensions with coatings as well as special heat treatment offering the longest edge life in such an unforgiving application.

Salestech supply Canter Knives, Chip Breakers, Counter Knives and Slabber Knives to fit the following machines as well as the ability to supply special purpose parts.

• Ahlstrom
• CM&E
• EWD
• Hew Saw
• Linck
• Lindex
• Soderhamn

Brush Chipper Knives

Salestech are suppliers of superior qualitybrush chipper knives to fit Bandit, Morbark, Vermeer and other mobile chippers. We also supply stump grinder teeth and plastic carry cases to facilitate the safe handling of chipper knives. We have a wide range available ex-stock our Melbourne warehouse.

Recycling Knives

Salestech supply a full range of knives and accessories for the recycling of plastic, electronic scrap, scrap metal, cables, tyres and many other applications.

Abrasives

Salestech supply a full range of grinding wheels, grinding segments, coated abrasives, diamond wheels and dressing stones.

To find out more about our products or to get recommendations based on your specific requirements, get in touch with our sales team today. Call 03 9553 1883 or email sales@akesalestech.com.au.